Volvo XC 90 Owner's Manual page 168

INSTRUMENTS AND CONTROLS
||
1. Open the app menu in the driver display by
pressing (1).
(It is not possible to open the app menu
while there is an unacknowledged message
in the driver display. The message must be
confirmed before the app menu can be
opened.)
2. Navigate to the trip computer app to left or
right with (2).
> The top four menu rows show measured
values for trip meter TM. The next four
menu rows show measured values for trip
meter TA. Scroll up or down in the list with
(3).
3. Scroll down to the option buttons to select
which information to show in the driver dis-
play:
•
Instantaneous fuel consumption
•
Distance to empty tank
•
Odometer
•
Mileage for trip meter TM, TA, or no dis-
play of mileage
•
Tourist (alternative speedometer).
•
Distance to empty battery
Select or deselect an option with the O but-
ton (4). The change is made immediately.
166
Resetting the trip meter
Reset the trip meter TM with one long press on
the RESET button on the left-hand stalk switch.
Trip meter TA only has automatic resetting. The
meter is reset if the car is not used for four hours
or more.
Change unit
Change the units for mileage, speed, etc. via the
centre display as follows:
1. Press Settings in the top view.
2. Press
System Units.
3. Under Units , select the required unit stand-
ard: Metric , Imperial or US .
NOTE
In addition to in the trip computer, these units
are also changed in Volvo's navigation sys-
tem*.
Related information
•
Trip computer (p. 164)
•
Show trip statistics in the centre display
(p. 167)
•
Using the application menu in the driver dis-
play (p. 103)
* Option/accessory, for more information, see Introduction.