Active Bending Lights; Adapting The Beam Pattern From The Headlamps - Volvo V90 2017 Owner's Manual

Active bending lights*

Active bending lights are designed to provide
maximum illumination in bends and junctions.
26
Cars with LED headlamps* can have active
bending lights, depending on the car's equip-
ment level.
Headlamp pattern with function deactivated (left) and
activated (right) respectively.
The LED headlamps can include the Active bend-
ing lights function, depending on the car's equip-
ment level. Active bending lights follow steering
wheel movements to provide maximum illumina-
tion in bends and junctions and thereby increase
safety.
The function is activated automatically when the
car is started. In the event of a fault in the func-
LED (Light Emitting Diode)
26
tion, the symbol illuminates in the driver
display at the same time as the driver display
shows an explanatory text.
The function is only active in weak daylight or
darkness and only when the car is moving and
dipped beam is switched on.
Deactivating/activating the function
The function is in activated mode when the car is
delivered from the factory and can be deacti-
vated/activated via the centre display in two
ways:
Via the function view
Press the Active Bending
Lights button.
Via settings
1. Press Settings
in the top view.
2. Press
My Car Lights and Lighting
Exterior Lights.
3. Deselect/select Active Bending Lights
Related information
•
Settings view (p. 169)
•
Front fog lamps/cornering lights* (p. 142)
INSTRUMENTS AND CONTROLS
Adapting the beam pattern from the
headlamps
If the car is equipped with LED headlamps with
adaptive functionality, then the headlamp pattern
should be reset when changing from right to left-
hand traffic, and vice versa.
Halogen headlamps
The headlamp pattern does not need to be
adjusted. The headlamp pattern is designed in
such a way that oncoming traffic is not dazzled.
LED headlamps*
The headlamp pattern should be adjusted if the
active main beam has adaptive functionality; see
the section "Activating/deactivating main beam".
The car must remain stationary and be running
when the headlamp pattern is changed between
right and left-hand traffic.
1. Press Settings in the top view in the centre
display.
2. Press
My Car Lights and Lighting
Exterior Lights.
3. Select Temporary Right Hand Traffic
Temporary Left Hand Traffic
.
Related information
•
Settings view (p. 169)
•
Activating/deactivating main beam (p. 138)
/
.
141
* Option/accessory.