Adapting The Headlamp Pattern From The Headlamps; Position Lamps - Volvo V60 TWIN ENGINE 2019 Owner's Manual

LIGHTING
Adapting the headlamp pattern
from the headlamps
The headlamp pattern can be reset when
changing from right to left-hand traffic, and
vice versa. This function adapts the light from
the headlamps to reduce the risk of dazzling
oncoming traffic.
1. Settings
Tap on in the centre display's
top view.
2. Press
My Car Lights and Lighting
Exterior Lights.
3. Select Temporary Right Hand Traffic
Temporary Left Hand Traffic
NOTE
Active bending lights are not available
when the headlamp pattern is temporarily
adapted from left to right-hand traffic, or
vice-versa.
Related information
Other settings in the centre display's top
•
view (p. 128)
Function view in centre display (p. 118)
•
Active bending lights* (p. 155)
•
150

Position lamps

Position lamps can be used so that other road
users can see the car if it stops or is parked.
The position lamp is switched on with the
rotating ring on the stalk switch.
/
.
Stalk switch rotating ring in position lamps position.
Turn the rotating ring to the
the position lamps are switched on (number
plate lighting is switched on at the same
time).
If the car's electrical system is in ignition posi-
tion II then the daytime running lights are
switched on instead of the front position
lamps. When the rotating ring is in this posi-
tion, the position lamps are switched on
regardless of the ignition position of the car's
electrical system.
If the car is stationary but running, the rotating
ring can be moved to the position lamp
position from another position to switch on
only the position lamps instead of other light-
ing.
When driving for more than 30 seconds at
max. 10 km/h (approx. 6 mph), or if the speed
exceeds 10 km/h (approx. 6 mph), the daytime
running lights are switched on. The driver
should turn to a position other than
If the tailgate is opened when it is dark out-
side, the rear position lamps come on (if not
already switched on) to warn road users
approaching from behind. This takes place
irrespective of the position of the rotating ring
or the ignition position of the car's electrical
system.
Related information
Lighting control (p. 148)
•
position -
Ignition positions (p. 448)
•
.
* Option/accessory.