•
Bulb specifications (p. 494)
•
Ignition positions (p. 346)
Replacing the dipped beam bulb
The dipped beam bulb in halogen headlamps
can be replaced by the driver.
Before the bulb can be replaced, the plastic
cover over the headlamp must be removed; see
the article "Bulb replacement".
1. Detach the headlamp's round rubber cover.
2. Unplug the connector from the bulb.
3. Detach the bulb by pulling straight out.
4. Replace the bulb.
5. The guide pin on the bulb must be facing
straight up when it is inserted into the
socket.
6. Press in the connector.
7. Refit the headlamp's rubber cover.
MAINTENANCE AND SERVICE
Related information
•
Bulb replacement (p. 489)
•
Bulb specifications (p. 494)
491