The function is only active in twilight or darkness
and only when the car is moving.
Deactivating/activating the function
The function is in activated mode when the car is
delivered from the factory and can be deacti-
vated/activated via the centre display in two
ways:
Via the function view
Press the
Active Bending
Lights
button.
Via settings
1. Press
Settings
in the top view.
2. Press
My Car
Lights
Exterior
3. Deselect/select
Active Bending Lights
Related information
•
Settings view (p. 161)
•
Front fog lamps/cornering lights* (p. 135)
Adapting the beam pattern from the
headlamps
If the car is equipped with active LED head-
lamps and the Active main beam function is
used, then the headlamp pattern must be reset
when changing from right to left-hand traffic, and
vice versa.
Halogen headlamps
The headlamp pattern does not need to be
adjusted. The headlamp pattern is designed in
such a way that oncoming traffic is not dazzled.
LED headlamps*
Headlamp pattern adjustment is required if the
Active main beam function is used. The car must
be stationary with the engine running when the
headlamp pattern is shifted between right and
left-hand traffic.
Lights.
1. Press
Settings
.
display.
2. Press
My Car
3. Select
Temporary right-hand/left-hand
traffic
.
Related information
•
Settings view (p. 161)
•
Activating/deactivating main beam (p. 132)
in the top view in the centre
Lights
Exterior
Lights.
INSTRUMENTS AND CONTROLS
Front fog lamps/cornering lights*
The front fog lamps have cornering lights that
shine diagonally to the side.
Button for front fog lamps.
The front fog lamps can be switched on in combi-
nation with main/dipped beam or the position
lamps.
Press the on/off button. The indicator symbol
illuminates in the driver display when the
front fog lamps are switched on.
NOTE
Regulations on the use of fog lamps vary
from country to country.
* Option/accessory, for more information, see Introduction.
}}
135