Managing Speed For The Cruise Control - Volvo XC 90 Owner's Manual

–
With the symbol/function
press the steering wheel button
> Cruise Control starts and the current
speed becomes the stored speed.
NOTE
Cruise Control cannot be enabled at speeds
below 30 km/h.
Related information
•
Cruise control (p. 264)
•

Managing speed for the Cruise control

(p. 265)
•
Deactivating/reactivating the cruise control
(p. 266)
•
Deactivating Cruise Control (p. 267)
Managing speed for the Cruise
displayed,
control
(2).
The Cruise control (Cruise Control - CC) can be
set to different speeds.
Buttons and symbols for functions.
– Change the stored speed with short or long
presses on steering wheel button
- (3):
•
To change in steps of +/– 5 km/h, use
short presses — each press results in a
change of +/– 5 km/h.
•
To change in steps of +/– 1 km/h, hold
the button depressed and release it when
the indicator (4) in the driver display
shows the desired speed.
> The speed set after the last press is
stored in the memory.
If the driver increases the car's speed using the
accelerator pedal before pressing the steering
wheel button , the speed stored will be the
car's speed when the button is depressed, provi-
ded the driver's foot is on the accelerator pedal at
the moment when the button is depressed.
A temporary increase in speed with the accelera-
tor pedal, e.g. during overtaking, does not affect
the setting - the car returns to the last stored
speed when the accelerator pedal is released.
Using engine braking instead of the foot
brake
With Cruise Control, speed is regulated with less
frequent application of the foot brake. On a
downhill gradient it may sometimes be desirable
to start moving a little faster and limit the acceler-
ation by engine braking. In this case the driver
can temporarily disable foot brake application by
Cruise Control.
(1) or
– Depress the accelerator pedal about halfway
down and release.
> Cruise Control will automatically disen-
gage automatic foot braking and uses
engine braking only.
Related information
•
Cruise control (p. 264)
•
Activating and starting the Cruise control
(p. 264)
DRIVER SUPPORT
}}
265