INSTRUMENTS AND CONTROLS
Rear seat
The car has 7 seats which means that the rear
seats consist of two rear seat rows. The second
seat row has three individual seats, while the
third seat row has two individual seats.
Related information
•
Adjusting the head restraints in the second
seat row (p. 126)
•
Adjusting the seat longitudinally in the sec-
ond seat row (p. 127)
•
Adjusting the backrest rake in the second
seat row (p. 128)
•
Lowering backrests in the second seat row
(p. 129)
•
Entry/exit for third seat row (p. 131)
•
Lowering backrests in the third seat row
(p. 131)
•
Activating/deactivating heating of the seats*
(p. 193)
126
Adjusting the head restraints in the
second seat row
Adjust the centre seat head restraint according
to the height of the passenger. Fold down the
head restraints in the outer seats to improve
rearward visibility*.
Adjusting the head restraint, centre seat
The centre seat's head restraint must be
adjusted according to the passenger's height so
that, if possible, the whole of the back of the
head is covered. Slide it up manually as required.
To lower the head restraint, the button (located in
the centre between the backrest and head
restraint, see illustration) must be pressed in
while the head restraint is pressed down care-
fully.
WARNING
The centre seat head restraint must be in its
lowest position when the centre seat is not
used. When the centre seat is used, the head
restraint must be correctly adjusted to the
height of the passenger so that it covers the
whole of the back of the head if possible.
* Option/accessory, for more information, see Introduction.