INSTRUMENTS AND CONTROLS
||
Resetting
If the battery is disconnected then the function
for automatic opening must be reset so that it
can work correctly.
1. Gently raise the front section of the button to
raise the window to its end position and hold
it there for one second.
2. Release the button briefly.
3. Raise the front section of the button again
for one second.
WARNING
A reset must take place for pinch protection
to work.
Related information
•
Power windows (p. 150)
•
Ignition positions (p. 346)
•
Remote control key (p. 224)
•
Locking/unlocking from the outside (p. 228)
•
Locking/unlocking from the inside (p. 232)
152
Using the sun blind
Sun blinds are built into each rear door.
Rear door
Hook with associated catch
1. Pull up the sun blind and attach it to the
hook in the upper door frame.
2. Lock the sun blind by moving the catch
upwards.
The window can still be opened and closed with
the sun blind up.
Adjusting the door mirrors
The door mirror positions are adjusted with the
joystick in the driver's door controls.
Door mirror controls.
Adjusting
1. Press the L button for the left-hand door mir-
ror or the R button for the right-hand door
mirror. The light in the button illuminates.
2. Adjust the position with the joystick in the
centre.
3. Press the L or R button again. The light
should no longer be illuminated.