Presetting Stations; Recalling A Preset - Roberts Gemini RD-45 User Manual

Presetting stations

There are 4 memory presets for each of the two wavebands which
allow you to quickly tune the radio to your favourite stations. Presets are
stored in a memory which remembers the settings even when the radio
is switched off.
1. Press and release the On/Off button to switch on your radio.
2. Tune to the required station as previously described.
3. Press and hold the required Preset button until the display shows e.g.
'Preset 1 Saved'. The station will be stored under the chosen preset
button. Repeat this procedure for the remaining presets.
4. Stations stored in the memories may be overwritten by following the
above procedure.

Recalling a preset

1. Press and release the On/Off button to switch on your radio.
2. Select the required waveband.
3. Momentarily press and release the required Preset button. Your radio
will tune to the station stored in preset memory. The display will show
for example, 'Preset 1 Empty' if no station has been stored to that
preset.
1
3
PlntRock
Preset 1 Saved
1
3
PlntRock
Connecting...
DAB
16