Dmx Mode; Master/Slave Mode; Sound Active Mode; Standalone (Program) Mode - Blizzard Lighting ProPar Seven 4 User Manual

DMX Mode

Allows the unit to be controlled by any universal DMX controller.
1.) The default mode for the fixture is DMX, which appears as
the LED Readout. To select a different DMX address, hit the <ENTER>
button and use the <UP/DOWN> buttons to select the correct address,
then hit <ENTER> to confirm.
Auto, Master/Slave, Sound Active Modes:
Allows a single or Master/Slaved units to run factory installed programs at user
selectable speeds.
1.) To use the fixture in 4 channel or 7 channel mode, use the <MENU>
and <UP/DOWN> buttons to select
button. Then use the <UP/DOWN> buttons to select either
7CH.
2.) To set the fixture in automatic mode, use the <MENU> and <UP/
DOWN> buttons to select
DOWN> buttons to select
<UP/DOWN> buttons to select
then be prompted to select the chase speed by selecting from
(slowest) to
3.) To use the fixture as either a master or slave unit, use the <MENU>
and <UP/DOWN> buttons to select
button. Then select either
<ENTER> button to confirm.
4.) To adjust the fade speed navigate to
select
confirm.

Sound Active Mode:

1.) To use this fixture in sound active mode, select
<ENTER> button. Then select
Manual Color Adjustment:
Allows the user to adjust the color balance of the fixture. These settings are
global, they will effect all modes.
1.) use the <MENU> and <UP/DOWN> buttons to select
hit the <ENTER> button.
2.) Then use the <UP/DOWN> buttons to scroll to either
GREE
Select the maximum level for each color between
hit <ENTER> to confirm.
ProPAR 7.4 Manual Rev. A
Press the <ENTER> button to confirm.
SP 8
(fastest). Then hit <ENTER> to confirm.
SP 1
(slowest) to
BLUE
(green), (blue), or
CHND
SHND,
hit <ENTER>. Then use the <UP/
COLO
and hit <ENTER>. Then use the
AUTO
, and press <ENTER>. You will
SLND
NAST
for master or
FADE,
SP 8
(fastest). Press the <ENTER> button to
SOUN
and hit enter.
Uh1t
(White), and press <ENTER>.
Page 12
ADDR
and hit the <ENTER>
4CH or
and then hit the <ENTER>
SLAU
for slave. Press the
hit <ENTER>, and
SHND
, then press the
NANU
RED
0-255
(0=off), then
Copyright (c) 2012 Blizzard Lighting, LLC
on
SP 1
and
(red),