Subscribe to Our Youtube Channel
Related Manuals for Blizzard Lighting Stiletto Z3
Summary of Contents for Blizzard Lighting Stiletto Z3
- Page 1 STILETTO Blizzard Lighting, LLC www.blizzardlighting.com Waukesha, WI USA Copyright (c) 2015...
-
Page 2: Table Of Contents
DMX Values In-Depth Troubleshooting 5. Appendix A Quick Lesson On DMX Keeping Your Stiletto™ Z3 As Good As New Returns (Gasp!) Shipping Issues Tech Specs Dimensional Drawings Page 2 Stiletto™ Z3 Moving Head - Rev. A (c) 2015 Blizzard Lighting, LLC... -
Page 3: Stiletto™ Z3 Moving Head
Blizzard Lighting™ assumes no responsibility or liability for any errors or omissions that may appear in this user manual. Blizzard Lighting™ reserves the right toe update the existing document or to create a new document to correct any errors or omissions at any time. -
Page 4: Safety Instructions (Don't Stick Your Hand In The Toaster!)
• Avoid direct eye exposure to the light source while it is on. Caution! There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please contact Blizzard Lighting at www. blizzardlighting.com/tickets. Page 4 Stiletto™... -
Page 5: Meet The Stiletto™ Z3 Moving Head
White Intensity (0% <--> 100%) Color Macros Color Macro Speed (ch. 13) Built-in Programs + Sound Active Built-in Program Speed (ch. 15) Reset (between ch. 150-200) Page 5 Stiletto™ Z3 Moving Head - Rev. A (c) 2015 Blizzard Lighting, LLC... -
Page 6: The Stiletto™ Z3 Pin-Up Picture
Figure 1: The Stiletto™ Z3 Pin-Up Picture 3* 15-watt 4-in-1 RGBW LEDs Head/Arm 4-button LED Control Panel Figure 2: The Rear Connections 3-Pin DMX Input 3-Pin DMX Output Fuse Cover Power Input Page 6 Stiletto™ Z3 Moving Head - Rev. A (c) 2015 Blizzard Lighting, LLC... -
Page 7: Setup
Maximum capacitance between conductors – 30 pF/ft. Maximum capacitance between conductor & shield – 55 pF/ft. Maximum resistance of 20 ohms / 1000 ft. Nominal impedance 100 – 140 ohms Page 7 Stiletto™ Z3 Moving Head - Rev. A (c) 2015 Blizzard Lighting, LLC... -
Page 8: Cable Connectors
We recommend connecting the fixtures in terms of their proximity to the controller, rather than connecting the lowest fixture number first, and so on. Step 3: Connect other fixtures in the chain from output to input as above. Place a DMX terminator on the output of the final fixture to ensure best communication. Page 8 Stiletto™ Z3 Moving Head - Rev. A (c) 2015 Blizzard Lighting, LLC... -
Page 9: Fixture Linking (Master/Slave Mode)
• When selecting installation location, take into consideration lamp replacement access (if applicable) and routine maintenance. • Safety cables MUST ALWAYS be used. • Never mount in places where the fixture will be exposed to rain, high humidity, extreme temperature changes or restricted ventilation. Page 9 Stiletto™ Z3 Moving Head - Rev. A (c) 2015 Blizzard Lighting, LLC... -
Page 10: Mounting Points
Better safe than sorry! Be sure to complete all rigging and installation procedures before connecting the main power cord to the appropriate wall outlet. Page 10 Stiletto™ Z3 Moving Head - Rev. A (c) 2015 Blizzard Lighting, LLC... -
Page 11: Clamp Mounting
4.) Lock Washers Securing the Fixture Regardless of the rigging option you choose for your fixtures, always secure them with a safety cable. And make sure that the mounting bracket is securely tightened down to the bottom of the fixture using the supplied lock washers and socket cap screws. Page 11 Stiletto™ Z3 Moving Head - Rev. A (c) 2015 Blizzard Lighting, LLC... -
Page 12: Operating Adjustments
Press the <ENTER> button to select the menu function currently displayed, or to enable a menu option. To return to the previ- ous option or menu without changing the value, press the <MENU> button. Page 12 Stiletto™ Z3 Moving Head - Rev. A (c) 2015 Blizzard Lighting, LLC... -
Page 13: Control Panel Menu Structure
1.) Navigate the main menu until you reach CHSE. 2.) Push the <ENTER> button. 3.) Use the <UP/DOWN> buttons to select either CH12 or CH17. 4.) Press the <ENTER> button to confirm your selection. Master/Slave Mode 1.) This fixture does not require additional settings to run as a slave. The first fixture linked in the DMX chain will serve as the master, those linked thereafter will be slave fixtures and follow the master fixture. Page 13 Stiletto™ Z3 Moving Head - Rev. A (c) 2015 Blizzard Lighting, LLC... -
Page 14: Auto, Sound Active, & Manual Adjustments
Red Intensity (0% <--> 100%) 000 <--> 255 Green Intensity (0% <--> 100%) 000 <--> 255 Blue Intensity (0% <--> 100%) 000 <--> 255 White Intensity (0% <--> 100%) Page 14 Stiletto™ Z3 Moving Head - Rev. A (c) 2015 Blizzard Lighting, LLC... -
Page 15: Troubleshooting
Make sure all connectors are seated properly and securely. ing / Responding Use Only DMX Cables. Erratically Install a Terminator. Check all cables for defects. Reset fixture(s). Fixture Moving On Verify proper mode of operation. Is the fixture in “Auto” mode? Its Own Page 15 Stiletto™ Z3 Moving Head - Rev. A (c) 2015 Blizzard Lighting, LLC... -
Page 16: Appendix
In summary, since its design and evolution in the 1980’s DMX has become the standard for lighting control. It is flexible, robust, and scalable, and its ability to control everything from dimmer packs to moving lights to foggers to lasers makes it an indispensable tool for any lighting designer or lighting performer. Page 16 Stiletto™ Z3 Moving Head - Rev. A (c) 2015 Blizzard Lighting, LLC... -
Page 17: Keeping Your Stiletto™ Z3 As Good As New
Damage incurred in shipping is the responsibility of the shipper, and must be reported to the carrier immediately upon receipt of the items. Claims must be made within seven (7) days of receipt. Page 17 Stiletto™ Z3 Moving Head - Rev. A (c) 2015 Blizzard Lighting, LLC... -
Page 18: Tech Specs
LEDs. DISCLAIMER: The power connector fitted to the fixture and fixture cord are designed for compatibility with products manufactured by Neutrik AG, Neutrik USA and their related entities, however they are not manufactured by, affiliated with or endorsed by Neutrik AG, Neutrik USA, or any related entity. Neutrik® and power- CON® are registered trademarks of Neutrik AG. Page 18 Stiletto™ Z3 Moving Head - Rev. A (c) 2015 Blizzard Lighting, LLC... -
Page 19: Dimensional Drawings
Dimensional Drawings 8.3” (21 cm) 6.9” (17.5 cm) 5.5” (14 cm) Page 19 Stiletto™ Z3 Moving Head - Rev. A (c) 2015 Blizzard Lighting, LLC... - Page 20 Enjoy your product! Our sincerest thanks for your purchase! --The team @ Blizzard Lighting...
Need help?
Do you have a question about the Stiletto Z3 and is the answer not in the manual?
Questions and answers