Control Panel Menu Structure; Dmx Mode; Set The Starting Dmx Address; Select The Dmx Channel Mode - Blizzard Lighting Stiletto Z3 User Manual

Control Panel Menu Structure

Addr
CHSE
NodE
SEnS
PAn
TiLT
bALA
dEFA
rEST

DMX Mode

Allows the unit to be controlled by any universal DMX controller.
The default mode for the fixture is DMX, so the first menu item that you need to edit is the
starting DMX address.

Set the Starting DMX Address:

1.) Navigate the main menu until you reach Addr.
2.) Push the <ENTER> button.
3.) Use the <UP/DOWN> buttons to select a DMX channel from d001-d512.
4.) Press the <ENTER> button to confirm.

Select the DMX Channel Mode:

1.) Navigate the main menu until you reach CHSE.
2.) Push the <ENTER> button.
3.) Use the <UP/DOWN> buttons to select either CH12 or CH17.
4.) Press the <ENTER> button to confirm your selection.
Master/Slave Mode
1.) This fixture does not require additional settings to run as a slave. The first fixture linked
in the DMX chain will serve as the master, those linked thereafter will be slave fixtures and
follow the master fixture.
Stiletto™ Z3 Moving Head - Rev. A
d001-d512
CH.17
CH.12
DNH
FASt
SLou
Soun
SE00-SE99
on/oFF
on/oFF
rEd
GrEE
BLuE
uHiL
YES <ENTER>
YES <ENTER>
To choose a DMX address from 001-512
17-channel DMX mode
12-channel DMX mode
DMX mode
Fast auto mode
Slow auto mode
Sound active mode
Mic sensitivity (0% <--> 100%)
Reverse pan
Reverse tilt
Global red intensity (0% <--> 100%)
Global green intensity (0% <--> 100%)
Global blue intensity (0% <--> 100%)
Global white intensity (0% <--> 100%)
Factory reset
Motor reset
Page 13
(c) 2015 Blizzard Lighting, LLC