Address Mode - Dmx Channel Selection; Run Mode - Dmx Mode, Auto And Sound Active; Test Mode - Blizzard Lighting Blade RGBW User Manual

Address - DMX Channel Selection
Allows the unit to be controlled by any universal DMX controller.
1.) The default mode for the fixture is DMX, which appears as 001 on the LCD Read-
out. To select a different DMX address, use the <UP/DOWN> buttons to highlight
the Address
buttons to choose your desired starting DMX address, then hit <ENTER> again to
confirm your choice.
2.) Note: This fixture does not require additional settings to run as a slave.
The first fixture linked in the DMX chain will serve as the master.
Run Mode - DMX Mode, Auto, & Sound Active:
Allows a single or Master/Slaved units to run factory installed programs at user selectable
speeds.
1.) To use the fixture in 11 or 15 channel mode, use the <UP/DOWN> buttons to
scroll to
while
TER> button to confirm your choice.
2.) To set the fixture in automatic mode, use the <UP/DOWN> buttons to scroll to
RunMode
Auto
button to confirm your choice.
3.) To set the fixture in sound active mode, use the <UP/DOWN> buttons to
scroll to
again while
choice.

Test Mode

A special mode which allows you test the fixtures x-axis motor, y-axis motor, and
focus motor position (000-255). Here you can also test red, green, blue, and white
intensity (000-255). These RGBW settings also serve as the user defined
color in 15-channel DMX mode, channel 10.
Language
This is where you can change the language settings of the fixture from English to
Chinese, if so desired. Hint: You might wanna start learning it sooner, rather than
later!
Blade™ RGBW User Manual Rev. A
icon and push <ENTER>. Then use the use the <UP/DOWN>
RunMode and hit the <ENTER> button. Push the <ENTER> button again
DMX is highlighted and scroll to either
and hit the <ENTER> button. Push the <ENTER> button again while
is highlighted and choose from
RunMode and hit the <ENTER> button. Push the <ENTER> button
is highlighted. Then push the <ENTER> button to confirm your
Sound
11Ch or
Auto1 to Auto8.
Page 14
Then push the <EN-
15Ch.
Then push the <ENTER>
Copyright (c) 2012 Blizzard Lighting, LLC