Operating Adjustments; Dmx Mode & Dmx Mode Selection; Master/Slave Mode; Sound Active Mode - Blizzard Lighting The Puck User Manual

4. OPERATING ADJUSTMENTS

NOTE: After making any adjustment, hold the <MENU> button for approximately 3
seconds, otherwise the fixture will return to the correct mode after approximately 10
DMX Mode
Allows the unit to be controlled by any universal DMX controller.
1.) The default mode for the fixture is DMX, which appears as
readout. Push the <ENTER> button then the <UP> and <DOWN> buttons to
choose a channel between
2.) To change between DMX channel modes, select
<ENTER>. Select either
to confirm.
Master/Slave Mode (Auto/Sound Active/Color Preset/Custom):
Allows you to link up to 32 units together without a controller.
1.) Use standard DMX cables to daisy chain your units together via the DMX connector on
the rear of the units.
2.) Choose a unit to function as the Master. The master unit must be the first unit.
Master:
3.) Then set other fixtures to slave run in slave mode by using the same procedure.
Slave:
NOTE: Fixtures in slave mode will display
master mode to use it as a standalone fixture.
4.) On the master fixture, use the <UP>/<DOWN> keys to reach
you to select other functions:
Sound active
Auto mode
Color preset
Color fade
NOTE: Speed 1 = Fastest (Approx. 1.5 sec. per color), Speed 8 = Slowest (Approx.
per color).
Puck Couch Potato RGBA Manual Rev. C
seconds.
512
1
. Press <ENTER> again to confirm.
and
7Ch 4Ch
, then press <ENTER> again
or
SLNd
then
SLNd SL
then
6
P r
. This is NORMAL. Return the fixture to
SoUn S1 - S3,
then
S1
= Sound Active + Strobe
S2
= Sound Active - Color Snap
S3
= Sound Active + Fade
Auto
then
CoLo
then
FAdE
then
Page 14
Addr
ChNd
, then press
NASt
to confirm.
9 6
to confirm.
Shnd
<ENTER>.
SP --
<ENTER>, then choose speed 1-8.
Scroll through built-in colors, <ENTER>
SP --
<ENTER>, then choose speed 1-8.
Copyright (c) 2013 Blizzard Lighting, LLC
on the LED
, which allows
2 min.