Manage Nvr; Check System Information; System Information; Event Information - Provision ISR IP series User Manual

Manage NVR

7
7.1

Check System Information

Check system information includes five submenus: system, event, log, network and online user.
7.1.1

System Information

In this interface, user can check the hardware version, MCU version, kernel version, device ID, etc.
7.1.2

Event Information

In this tab, you can search for events like motion, sensor and video loss. The utility provides an interface to
have a date based and a channel based search. This report can further be saved on a USB flash drive as an
html file using the export button.
7.1.3

Log Information

In this tab, you can search for relevant logs as per the set date and event which includes operation, setup,
playback, backup, search, check information and error. This report can further be saved on a USB flash
drive as an html file using the export button.
7.1.4

Network Information

In this interface, you can check relevant parameters of network.
7.1.5

Online Information

In this tab, you can check the details of the connected online users.
Refresh: refresh the current interface.
Disconnect: Disconnect the online users to access NVR. If this function is used by the admin, the particular
PC will not be able to access the device for five minutes.
7.1.6

Record Information

In this interface, you can check the resolution, ftp and record status including sensor alarm
recording, motion recording, manual recording or schedule recording.