Provision ISR IP series User Manual page 3


Read this user manual carefully and use the device correctly and safely.

NVR warranty requires an intact serial number located on the bottom of the NVR and a valid invoice or
receipt with the date of purchase.

We do not warrant all the content is correct.

The contents of this manual may be out-dated.

If you are not certain of something, you should contact technical support before making any change, or
installing the NVR.

This device should be operated only from the type of power supply indicated on the marking label. The
voltage of the power must be verified before using.

If you plan not to use the NVR for a long time, shut it down and unplug the power cable.

Don't install this device close to a heat sources (e.g. radiators, heat registers, stoves, etc.).

Do not install this device near water.

Clean only with a dry cloth.

Do not block the ventilation openings.

Place the device in a ventilated place.

Do not unplug the NVR when the device is working: the correct method to shut down NVR is to perform
software shutdown by pressing the "shut down" button from the main menu.

PROVISION-ISR NVR is intended for indoor use only.

Do not expose the NVR to rain or moist conditions.

If any solid or liquid gets inside the NVR, shut down the NVR and unplug the power supply as soon as
possible, and get it checked by a qualified technician.

Refer all servicing to qualified service personnel.

Do not try to repair the device by yourself without technical aid or approval.

This manual is suitable for conventional NVRs (Network video recorder) – Non-PoE
CAUTION