Provision ISR IP series User Manual page 39

Step 3: In General tab, input username, password and select user type. You can also check "Binding PC
MAC Address" and input this address.
Step 4: Click "OK" to save the setting.
Note: When the default value of binding PC MAC Address is 0, the user is not bound with the
specified computer. If the bind option is used, the user would be able to log into the NVR only
through the specific computer (carrying the MAC address).
Step 5: Select Authority tab and then assign the operation rights for particular user. Refer to Fig 5-29.
Step 6: Click OK to save the setting.
To delete user:
Step 1: Enter into MenuSetupUsers interface.
Step 2: Select the added user you want to delete and then click "Delete" button.
To modify user:
Step 1: Enter into MenuSetupUsers interface.
Step 2: Select the added user you want to modify and then click "Modify" button to do the relevant
operation.
Fig 5-28 Add-General
Fig 5-29 Add User-Authority