Table of Contents
Advertisement
®
SBC82810 Pentium
M All-in-One Half-Size Board User's Manual
On-Chip Serial ATA configuration
This option allows you to setup your Serial ATA work with the
modes below:
Disable:
This will disable any Serial ATA Device.
Auto:
This will allow you to let the BIOS auto configure
your IDE drivers if you don't know how to select the
mode.
Combined Mode:
This will let you configure the Serial ATA and Parallel
ATA enforced to max of 2 IDE devices on each Serial
and Parallel ATA.
Enhance Mode:
This will allow you to enable the max 6 IDE drivers.
(Notice! This mode only can work under Windows
2000/XP).
SATA Only Mode:
This allows you to force the Serial ATA work in
legacy
Serial ATA Port Mode
This option allows you to setup your Serial ATA work with the
modes below:
IDE Mode:
On-Chip Serial ATA configuration.
RAID Mode:
Support Intel Software RAID
70
Serial ATA Setup Information
Advertisement
Table of Contents
Need help?
Do you have a question about the SBC82810 Series and is the answer not in the manual?
Questions and answers