Acpi Function; Power Management - AXIOMTEK SBC82810 Series User Manual

®
SBC82810 Pentium M All-in-One Half-Size Board User's Manual

ACPI Function

This item allows
Configuration and Power Management (ACPI). The options
available are Enabled, Disabled.

Power Management

This option allows you to select the type (or degree) of power
saving for Doze, Standby, and Suspend modes. The table below
describes each power management mode:
Maximum power savings. Only Available for SL CPUs.
Max
Inactivity period is 1 minute in each mode.
Saving
User Define Sets each mode individually. Select time-out periods in
the PM Timers section, following.
Min Saving Minimum power savings. Inactivity period is 1 hour in
each mode (except the hard drive).
Disabled Default value
PM Control by APM
If Advanced Power Management (APM) is installed on your
system, selecting Yes gives better power savings. The default
value is "Yes".
No System BIOS will ignore APM when power managing the
system
System BIOS will wait for APM's prompt before it enters any
PM mode (i.e., DOZE, STANDBY or SUSPEND).
Yes
Note: If APM is installed or if there is a task running, even
when the timer has timed out, the APM will not prompt
the BIOS to put the system into any power saving
mode!
NOTE:
If APM is not installed, this option has no effect.
50
you to enable/disable the Advanced
Award BIOS Utility