AXIOMTEK SBC82810 Series User Manual page 47

SBC82810 Pentium
Typematic Delay (Msec)
This option sets the display time interval from the first to the
second character when holding a key. The default value is "250".
Security Option
This item allows you to limit access to the system and Setup, or
just to Setup. The default value is "Setup".
The system will not boot and access to Setup will be
System
denied if the incorrect password is entered at the
prompt.
The system will boot, but access to Setup will be denied
Setup
if the correct password is not entered at the prompt.
NOTE:
To disable security, select PASSWORD SETTING
at Main Menu and then you will be asked to
enter password. Do not type anything, just
press <Enter> and it will disable security. Once
the security is disabled, the system will boot
and you can enter Setup freely.
OS Select for DRAM >64MB
This segment is specifically created for OS/2 when DRAM is
larger than 64MB. If your operating system is OS/2 and DRAM
used is larger the 64MB, you have to select "OS 2", otherwise
(under non-OS2), default is NON-OS2. The default value is "Non-
OS2".
Report No FDD For Win 95
This option allows Windows 95 to share IRQ6 (assigned to a
floppy disk drive) with other peripherals in case the drive does not
exist. The default setting is "No".
Award BIOS Utility
®
M All-in-One Half-Size Board User's Manual
250 msec
250
500 500 msec
750 750 msec
1000 msec
1000
41