Esd Precautions - AXIOMTEK SBC82810 Series User Manual

Integrated circuits on computer boards are sensitive to static
electricity. To avoid
discharge, observe the following precautions:
Do not remove boards or integrated circuits from their anti-static
packaging until you are ready to install them.
Before handling a board or integrated circuit, touch an unpainted
portion of the system unit chassis for a few seconds. This helps to
discharge any static electricity on your body.
Wear a wrist-grounding strap, available from most electronic
component stores, when handling boards and components.
Trademarks Acknowledgments
AXIOMTEK is a trademark of Axiomtek Co., Ltd.
MS-DOS and Windows are trademarks of Microsoft
Corporation.
PHOENIX-AWARD is a trademark of Award Software. Inc.
IBM, PC/AT, PS/2, VGA are trademarks of International
Business Machines Corporation.
Intel and Pentium are trademarks of Intel Corporation.
Winbond is a trademark of Winbond Electronics Corp.
Other brand names and trademarks are the properties
and registered brands of their respective owners.

ESD Precautions

damaging chips from electrostatic
iii