Oil Indicator Malfunction - PGO G-MAX 50 Service Manual

9.Oil indicator malfunction (Only available for 2T engine)
(a)The oil lamp doesn't light up, (when the main switch is at "ON"position)
Check and adjust
Turn the signal lamp
On. Check wiring
Of battey
Remove the oil lamp,
And connect with
Battery directly
Lamp lights
Check electric plug
Good condition
Remove oil gauge,
Check the lamp light
Up or not by moving
The float
Float upward: lamp Extinguishes
Float downward: lamp turn on
(b)Oil is enough but the indicator turns on all the time (when the main switch is "ON")
Check and adjust
Check all electric
plug
Remove oil gauge,
Check the lamp by
Moving the floating
Float upward: lamp
Extinguishes
Float downward: lamp
Turns on
Trouble condition
Normal
Lamp dims, light does
Not flash, no light
Lamp does not light up
No good
Good
Trouble condition
Good
Good
No good
Disorder
Disorder
The reason
fuse burn-out
battery has no power
main switch abnormal
circuit plug dropped off
main wiring disconnected
bulb burn out
electric plug is loose
or disconnected
main wiring disconnected
wrong wiring connection
float faulty
oil gauge switch dis-
connected or short circuit
The reason
electric plug is loose
or drop-off
main wiring disconnected
wrong wire connection
float faulty
oil gauge switch
disconnected or short circuit
oil tank distorted
some impure material
dropping in