2.Check the wearing condition of idle gear shaft
and idle gears.
Gear teeth number
3.Check the wearing condition of the final
reduction gear.
4.Check the wearing condition of the oil seal and bearing.
D. Assemble the final transmission mechanism, please follow the opposite procedure
Of disassembling. After locking the drain bolt, refill 90cc of gear oil SAE90.
Locking torque:M6: 1.0~1.2kg/M
Drain bolt:
43 T (125CC) ;
42 T (150CC)
M10: 3.5~4.0kg/M
M8: 1.8kg/M