Front Brake - PGO G-MAX 50 Service Manual

(F)Front brake
1. Disassembling and assembling of the front
brake comp.
a. Remove two bolts fixed on the front brake
comp and the front fork.
b. Remove the front brake comp.
c. Assemble the front brake comp.
Follows the opposite procedure of
dismantling.
Locking Torque:
M8: 2.0~3.0kg-m
2.Air releasing of the front brake comp
The procedure of air releasing
a .Fill the enough brake oil to the container
b. Do not let the brake oil overflow from the
master cylinder or container when assemble
the master cylinder cover.
c. Put the spanner upon the drain screw.
d. Lock and unlock the screw several times to
release the bubbles.
e. Operate slowly the brake lever several times.
f. Clamp the brake lever to the end.
g. Loose the drain screw, then open the lever completely.
h. Locking the drain screw and then loose it when the lever is opened completely.
i. Repeat above procedure until all the air in the brake system has been released
Completely.
Locking torque of leaking screw: 0.6 kg-m