The Operation Notice - PGO G-MAX 50 Service Manual

The operation notice：
(1)
1.For parts like the gasket, o-ring, clips and circlets, please change a new
part whenever re-assembled.
2.When trying to tighten screws or nuts, please lock tightly according to each
recommended locking torque and in the sequence of the "X" pattern.
3.Please use PGO or PGO recommended parts.
4.After dismantling, please clean all parts involved or used for checking and
grease all contact surfaces when reassembling.
5.Use grease recommended by PGO.
6.When removing the battery, please disconnect the negative pole(-) first.
However, please connect the positive pole(+) first when assembling.
7.Before installing a new fuse, please be sure that the specification is correct.
8.After reassembling, please re-confirm that all connecting point, locking parts,
circuits, polar characteristics are functioning well before selling out.