Drive Pulley, Starter Clutch. Driven Pulley Troubleshooting; Drive Pulley, Starter Clutch. Driven Pulley Measurement Data - PGO G-MAX 50 Service Manual

A.Troubleshooting:
a.Engine starts, but vehicle don't move.
1.driving belt worn out
2.driving plate worn out
3.clutch lining worn out
4.driving plate's spring broken
b.the vehicle stops or tremble when running.
1.clutch lining spring cracked or broken.
c.Can't reach high speed, no pick-up
1.driving belt worn out.
2.Driving plate spring distortion.
3.Weight roller worn out
4.Driving plate dirty.
Note:
No grease and oil should be distributed over
driving belt and driving plate.
B. Measurement data
Item
The inner dia. Of slide driving
plate
The outer dia. Of boss, movable
Driving plate
Belt width
Clutch lining thickness
Clutch outer inner diameter
Driven plate spring, free length
The outer diameter of driven
Plate sets
The inner diameter of slide
Driven plate
The outer diameter of weight
Roller set
Standard value ( mm )
24.011~24.052
23.960.~23.974
20.0~21.0
3
125.0~125.2
151
33.965~34.025
34.000~34.025
17.920~18.080
Limit of use
( mm )
24.10
23.940
19.0
1.5
125.5
127
33.95
34.06
17.40