Switching The Broadcast Mode - Sony Ipela PCS-G60 Operating Instructions Manual

Switching the Broadcast Mode

At the beginning of the connection, the broadcast mode set in "Broadcast
Mode" and "Split" of the Multipoint setup menu is applied. You can change
the mode during communication using the Layout menu.
1
Press the LAYOUT button on the Remote Commander.
The Layout menu appears.
2
Use the V, v, B or b button on the Remote Commander to select the mode
to which you want to switch from "Broadcast Mode", then press the
ENTER button.
Layout
Screen Display Patterns
Full
PinP
Broadcast Mode
Split
Split: Selects the Split mode.
Split (A fixed): Fixes the picture of the terminal connected first in the
specified window of the fixed split mode.
Split (B fixed): Fixes the picture of the terminal connected second in the
specified window of the fixed split mode.
Split (C fixed): Fixes the picture of the terminal connected third in the
specified window of the fixed split mode.
Split (D fixed): Fixes the picture of the terminal connected fourth in the
specified window of the fixed split mode.
Split (E fixed): Fixes the picture of the terminal connected fifth in the
specified window of the fixed split mode.
Split (Near End Fixed): Fixes the local picture in the specified window of the
fixed split mode.
Voice Activate: Selects "Voice Activate" mode.
Self Broadcast: Broadcasts the local picture in broadcast select mode.
PandP Side by Side
PinP PinP
Terminal
0
Save
PinP
PinP
Cancel
Using the Display Control
193