Table of Contents
Advertisement
For details, see "About the Network Routing
Check" on page 99.
IP address of remote site
Enter the IP address of the remote terminal
you want to check.
Line I/F
LAN: Select to perform the routing check
for the network connected to the
connector.
Gateway
Displays the results of check for the default
gateway.
ping
Displays the results of check for
reachability, packet loss, RTT (Round-Trip
Time) and H.323 (H.323 communication
availability).
traceroute
Displays the results of check for HOP
(number of routers passed through to reach
the remote site) and total RTT.
Start Measurement
Select this button to start a network routing
check.
Previous
Select this button to restore the Machine
Status menu.
90
Restrictions on the Use of IPv6
Restrictions on the
Use of IPv6
The functions of the system are restricted as
follows when using the IPv6 Internet
Protocol or both the IPv4 and IPv6 Internet
Protocols.
Unusable functions with IPv6
• SNMP Mode*
• NTP
• Shared Phone Book*
• TOS*
• Network Routing Check*
• AMX Device Discovery*
• PPPoE
• Streaming
• NAT
• SIP
* Usable with IPv4 when using both IPv4 and
IPv6.
Advertisement
Table of Contents
