Chapter 4: Connection With Optional Equipment; Using A Tools Menu - Sony Ipela PCS-G60 Operating Instructions Manual

Chapter 4:
Connection with
Optional
Equipment
This chapter describes the various connections using the optional equipment in
addition to the components contained in the PCS-G60/G60D/G60DP Visual
Communication System.
To make a multipoint connection, see Chapter 6.

Using a Tools Menu

Pressing the TOOLS button on the Remote Commander opens the Tools menu
on the monitor screen.
The Tools menu allows you to perform operations often used simply by
selecting the item in the menu.
Tools
Home
Machine Status
Setup
Pressing the b button on the Remote Commander, selecting each item with the
V, v, B or b button and pressing the ENTER button enable the following
operations:
Notes
• "Presentation" is displayed only when the PCSA-DSG80 HD Data Solution software
(not supplied) is installed in the Communication System.
• "Reject Answer" is available only when the PCSA-MCG80 HD MCU software (not
supplied) is installed in the Communication System.
142
Using a Tools Menu
Presentation [Suspended] Execute
Streaming [Suspended] Execute
Recording [Suspended] Execute
Annotation [Suspended] Execute
Icon display
On
Reject Answer Off
Screen Capture Execute