Table of Contents
Advertisement
Icon/Image
Select the icon or a still image stored on a "Memory Stick" to be displayed
on the Phone Book.
Note
You cannot select a still image unless a "Memory Stick" in which still images are
stored is inserted.
One-Touch Dial Specified
Select whether to display the one-touch dial buttons in the Home menu.
Assign the F1, F2, F3 or F4 function button on the Remote Commander to
each one-touch dial button.
Line I/F
Select the line interface you are using to connect to a remote party. Select
from among IP, ISDN, TEL and SIP. Selecting any interface switches the
setting items in the List Edit menu.
Note
When a checkmark is put to "SIP" under "Line Interface" of the Line Interface setup
menu, you can select "SIP" from "Line I/F".
Communication Bit Rate
Select the communication bit rate when you select "IP" or "SIP" with
"Line I/F".
Number of Lines
Select the number of ISDN channels to be used when you select "ISDN"
with "Line I/F".
Auto Dial
Set this item only for the Private Phone Book (page 120). Setting "Auto
Dial" to "On" allows you to automatically dial one of the lists in the Private
Phone Book simply by inserting the "Memory Stick" in which the Private
Phone Book is registered.
4
Use the V, v, B or b on the Remote Commander to select "Save", then
press the ENTER button.
The settings are registered in the Phone Book.
Note
When a connection with a remote party not registered in the Phone Book is terminated,
you can register this remote party to the Phone Book. In this case, the IP address or line
number is shown in "Index" as the name of the remote party. Modify it if necessary.
To connect to the remote party without using bonding
If the system of the remote party is not equipped with the bonding function,
entering one telephone number does not allow you to connect all the line
numbers used to connect to the remote party. To connect to the remote party
116
Registering a Remote Party – Phone Book
Advertisement
Table of Contents
