To connect to a remote party
Select "IP" under "Line I/F", enter the user name or user number set by the
remote party, and dial.
LAN Connection through NAT
Connection using NAT allows one IP address to be shared by several
computers on the same LAN. This section describes how to set up visual
communication in NAT and global IP environments.
Enter a name in "Host Name" under the Basic Setup page in the LAN setup
menu, and enter the appropriate values for "IP Address", "Network Mask",
and "Gateway Address".
Set "NAT Mode" to "On" in the NAT Setup page of the LAN setup menu,
and enter the appropriate IP address in "WAN IP Address".
Setting Up the Network Configurations
192.100. 10. 10
192.100. 10. 1