Table of Contents
Advertisement
• "Transmitting Computer Picture" can be selected only when the computer picture
is being transmitted from the local site.
5
Use the V, v, B or b button on the Remote Commander to select
"Annotation Mode" and press the ENTER button.
Drawing: Allows you to write letters or graphics on the screen.
Pointing: Allows display of a pointer on the screen.
6
Use the V, v, B or b button on the Remote Commander to select "Start"
and press the ENTER button.
The
appears.
When the Drawing mode is selected,
monitor screen and
selected.
7
Write letters or graphics on the screen with a pen supplied with the pen
tablet, or move the pointer on the screen.
The written data is displayed on the screen in live.
/
For details on how to use the pen tablet, refer to the instruction manual
supplied with the pen tablet.
Operations during pointing
You can point to any desired portion on the monitor screen with a pointer. You
cannot write letters and graphics in pointing mode.
154
Using the Annotation Function
indicator indicating that the local party uses annotation
(pointer) appears when the Pointing mode is
(pen) indicator appears on the
Monitor screen
Advertisement
Table of Contents
