Fbwc Capacitor Pack - HP ProLiant ML350p Gen8 Maintenance And Service Manual

Power down the server (on page 26).
2.
Remove all power:
3.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
4.
For tower models, place the server on a flat, level surface with the access panel facing up.
o
For rack models, extend the server from the rack (on page 28).
o
Remove the access panel
5.
Remove the air baffle
6.
Disconnect the capacitor pack cable from the cache module.
7.
Remove the cache module.
8.
To replace the component, reverse the removal procedure.

FBWC capacitor pack

("Access panel" on page 29).
("Air baffle" on page 30).
Removal and replacement procedures 48