Fan Blank - HP ProLiant ML350p Gen8 Maintenance And Service Manual

Remove all power:
3.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
4.
For tower models, place the server on a flat, level surface with the access panel facing up.
o
For rack models, extend the server from the rack (on page 28).
o
Remove the access panel
5.
Remove the PCI air baffles.
6.
To replace the component, reverse the removal procedure.

Fan blank

To remove the component:
Do one of the following:
1.
For tower models, open and remove the bezel
o
For rack models, if installed, remove the security bezel (on page 27).
o
Power down the server (on page 26).
2.
Remove all power:
3.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
4.
For tower models, place the server on a flat, level surface with the access panel facing up.
o
For rack models, extend the server from the rack (on page 28).
o
Remove the access panel
5.
("Access panel" on page 29).
("Access panel" on page 29).
("Remove the tower bezel" on page 27).
Removal and replacement procedures 31