Optical Drive - HP ProLiant ML350p Gen8 Maintenance And Service Manual

Using the T-15 screwdriver, loosen T-15 screws securing the optical drive cage.
9.
Remove the optical drive cage.
10.
To replace the component, reverse the removal procedure.

Optical drive

To remove the component:
Do one of the following:
1.
For tower models, open and remove the bezel
o
For rack models, if installed, remove the security bezel (on page 27).
o
Power down the server (on page 26).
2.
Remove all power:
3.
Disconnect each power cord from the power source.
a.
("Remove the tower bezel" on page 27).
Removal and replacement procedures 38