Remove the access panel
b.
For rack models, do the following:
5.
Extend the server from the rack (on page 28).
a.
Remove the access panel
b.
Release thumbscrews and remove the rack bezel.
c.
Remove the air baffle
6.
Remove the fan cage.
7.
Remove the front I/O module assembly.
8.
To replace the component, reverse the removal procedure.
Power supply blank
Remove the blank.
To replace the component, reverse the removal procedure.
("Access
panel" on page 29).
("Access
panel" on page 29).
("Air
baffle" on page 30).
Removal and replacement procedures 40