HP ProLiant ML350p Gen8 Maintenance And Service Manual page 46

Power down the server (on page 26).
2.
Remove all power:
3.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
4.
For tower models, place the server on a flat, level surface with the access panel facing up.
o
For rack models, extend the server from the rack (on page 28).
o
Remove the access panel
5.
Remove the air baffle
6.
Loosen the screws, and then remove the graphic card bracket.
7.
Open the PCI retainer latch.
8.
("Access panel" on page 29).
("Air baffle" on page 30).
Removal and replacement procedures 46