Disconnect each power cord from the server
ii.
Remove the access panel
d.
Remove the rack bezel.
e.
Remove the component box blank.
3.
To replace the component, reverse the removal procedure.
Drive blank
To remove the component:
Do one of the following:
1.
For tower models, open and remove the bezel
o
For rack models, if install, remove the security bezel (on page 27).
o
Remove the drive blank.
2.
To replace the component, reverse the removal procedure.
Drive
("Access
panel" on page 29).
("Remove the tower
bezel" on page 27).
Removal and replacement procedures 36