Remove the drive from the carrier.
6.
To replace the component, reverse the removal procedure.
Hot-plug drive blank
CAUTION:
all bays are populated with either a component or a blank.
To remove the component:
If installed, remove the security bezel
1.
Remove the drive blank.
2.
To replace the LFF drive blank, slide the component into the bay until it clicks.
Hot-plug drive
CAUTION:
all bays are populated with either a component or a blank.
To remove the component:
Back up all server data on the drive.
1.
Determine the status of the drive from the drive LED definitions.
2.
If installed, remove the security bezel
3.
To prevent improper cooling and thermal damage, do not operate the server unless
("Remove the security bezel
To prevent improper cooling and thermal damage, do not operate the server unless
("Remove the security bezel
(optional)" on page 26).
(optional)" on page 26).
Removal and replacement procedures 32