Confirming The Exasan Raid System Driver In Windows; Figure 32: Device Manager In Windows Platform - Accusys ExaSAN A08S3-PS User Manual

3.3.5.2 Confirming the ExaSAN RAID system driver in Windows

After installing the ExaSAN RAID system HBA driver on a Windows based host server, confirm
the driver has been properly installed.
Go to Control Panel -> System Properties -> Hardware -> Device Manager (depending on
the version of Windows, the path may vary). If the driver has been correctly installed, the HBA is
listed with the ACS-6xxxx identifier (actual name may vary) as Storage Controllers.
Caution
If you see the HBA listed as an unknown device under Windows, follow
the driver installation steps to reinstall the driver. If you do not see the
HBA under Device Manager, Windows does not detect the card. Power
off the host server to reseat the HBA.
User Guide

Figure 32: device manager in Windows platform

3. Installation
Page 3-19