4.1.2.1 Adding and Removing Controllers
In order to administer a controller, it first needs to be added to the network. Once added, the
administrator is given full control over the controller.
RAIDGuard X is a powerful GUI management system. It can be used for remotely monitoring
the RAID controller. If using the server to administer RAID configurations, you must make sure
that the RAID host and server are on the same network. The direct attached storage client can
also add or remove controllers in RAIDGuard X.
Adding
1. Click Add Controller to display a list of available controllers on the network. If the ExaSAN
RAID system is used as a DAS, the controller is displayed as "Local" under the IP field.
2. Click on the controller to administer, enter the password. The default password for the
Accusys PCIe controllers is 00000000 (8 zeros).
3. Assign a name to the controller and click Add.
User Guide
Figure 36: GUI "Add RAID controller"
4. How to Use
Page 4-5