Figure 80: Two Types Of Snapshot Function - Accusys ExaSAN A08S3-PS User Manual

Create Shot
Create a snapshot of the selected slice. A maximum of 8 shots can be created. Once all shots
have been used, older shots must be deleted before new ones can be taken.
1. Select the Create Shot function from the drop down menu.
2. Select the required shot by clicking on the Shot No. radio button. From the respective drop
down menus, select the source volume and destination volume. Unavailable shots are
grayed out.
3. Check the Confirm box and click OK to take a snapshot.
User Guide

Figure 80: Two types of snapshot function

4. How to Use
Page 4-37