Installing The Firmware Update Files; Figure 87: Gui "Update System Code (Firmware) - Accusys ExaSAN A08S3-PS User Manual

4.1.3.2 Installing the Firmware Update Files

Caution
Before updating the firmware, Boot code or BIOS, Right-click on the
RAIDGuard X Server icon in the Windows notification area, and check
Remove from Windows Startup.
1. Select Controller in the Menu bar and select Update.
2. Update System Code, Boot Code, BIOS/EFI individually from the download path. During
the update process, the RAID system will stop all data access.
Caution
Do NOT interrupt or stop updates that are in progress.
3. Once the updates are complete, make sure to power off the ExaSAN RAID system and
host using the proper power down sequence and then power on, again following the proper
power on sequence.
User Guide

Figure 87: GUI "Update system code (firmware)"

4. How to Use
Page 4-44