4. How to Use
Follow the steps below to select a drive to unlock or change the ID.
Locked drives prevent the accidental loss of user data when drives are installed one at a time,
or a RAID member is accidentally removed while the controller is powered on. The meta-data
and user data on the locked drives are preserved for online/offline recovery. If users don't need
the data or the locked drive anymore, the locked drive can be changed into a spare drive by the
command of Unlock Drive.
1. Select the drive with the
icon. It will change to the
icon.
Figure 85: GUI "HDD locked"
2. Check the Confirm box and click Unlock Drive.
Figure 86: GUI "Unlock HDDs"
User Guide
Page 4-42