Before You Start; Installing The Driver And Raidguard X; Installing Raidguard X On Mac And Windows - Accusys ExaSAN A08S3-PS User Manual


Java-based application environment

3.3.3 Before You Start

Before RAIDGuard X can be installed on Windows, Mac, and Linux platforms, make sure you
have completed the following:

Install hard disk drives into the chassis. Please refer to Section 3.1.1, "Installing Disk
Drives".

Install the RAID host bus adapter card to your host server. Please refer to Section 3.1.2,
"Installing HBA Card".

Connect the QSFP cable between the A08S3-PS and the host server. Please refer to
Section 3.1.3, "Connecting the HBA to the A08S3-PS System".

Power on the A08S3-PS and the host server in the correct sequence. Please refer to
Section 3.2.1, "Powering On".

3.3.4 Installing the driver and RAIDGuard X

The RAIDGuard X GUI can be downloaded from the Accusys website. Go to the website
support page (http://www.accusys.com.tw/support/download_new.htm) for available downloads.
If you need more info or tech support, please contact your system integrator of ExaSAN product
or Accusys FAE Dept. (see Appendix C "Customer Service and Technical Support" for more
information)

3.3.4.1 Installing RAIDGuard X on MAC and Windows

RAIDGuard X Installation
1. Insert the CD-ROM into the CD-ROM drive of the MAC or PC.
2. For Macs, execute "CD-ROM/MAC Installation/Vx.x/6xxxx_IP_MAC_x_x_x.mpkg".
For PCs, execute "CD-ROM/Windows installation/GUI/x.x/6xxx_IP_Win_x.x.exe".
Note
If you cannot find the installation DVD or you want to install the latest
version of software, please go to Accusys official web site.
(http://www.accusys.com.tw/support/download_new.htm)
User Guide
3. Installation
Page 3-9