Raidguard X Menu Bar - Accusys ExaSAN A08S3-PS User Manual

RAIDGuard X Server runs constantly in the background on the host system.
To access RAIDGuard X Server:
For Macs: Go -> Application -> RAIDGuard X -> RAIDGuard X Server
For Windows: Start -> Program -> Accusys -> RAIDGuard X -> RAIDGuard X Server

4.1.2 RAIDGuard X Menu Bar

The menu bar across the top contains the following functions:
File –
Exit – Close the program.
Load Controller List – Refresh the controller list.
Language – English and Japanese are supported.
Note
These events are automatically saved as a txt file.
1. If your A08S3-PS is attached to a host directly (DAS): the path of
the log is in RAIDGuard X \Log.
2. If your A08S3-PS is connected to ExaSAN switch (SAN): the path
of the log is in /Library/Startupltems/RGX_Accussy.
Please send the log file to your vendor or Accusys tech support team to
analyze.
Controller –
Manual Add Controller – Manually search and add the controller. Refer to Section 4.1.2.1
Adding and Removing Controllers.
Update –
Update System Code – Click to update the firmware of the controller.
Update Boot Code – Click to update the boot code of the controller.
Update BIOS & EFI – Click to update the BIOS or EFI of the controller.
Dump controller log – Download the events log stored in the flash memory of the RAID
controller. The log is useful for Accusys Support team take troubleshooting.
Shutdown controller – When user clicks the option, RAID controller would write the data
from memory to HDDs forcibly.
Help –
About RAIDGuard X – Displays information about the RAIDGuard X version.
Help Center – Displays the help for RAIDGuard X.
User Guide
support@accusys.com.tw
4. How to Use
Page 4-4