Table of Contents
Advertisement
The Linux compiler should now begin compiling the driver.
# ls
Example:
Verify that acs_ame.ko has been compiled. If so, please type the following command
# insmod acs_ame.ko
# lsmod
Example:
The driver should be now loaded in Linux.
RAIDGuardX Installation
Before installing RAIDGuard X, make sure the RAID HBA drivers is already installed in your
Linux OS.
1. Insert the CD-ROM into the CD-ROM drive of the server or PC.
2. Open CD ROM/GUI/Server/Linux/AP/i386 or x86_64/AP_Accusys. Open a terminal window
on the folder and enter the following commands:
# cat /proc/devices
User Guide
3. Installation
Page 3-13
Advertisement
Table of Contents
