Table of Contents
Advertisement
1.2.3
Unpacking
Follow the steps below to open the carton and remove the system from its packaging. .
1. Read Chapter 2, "Preparing to Install ExaSAN A08S3-PS."
2. Remove any packing material on the outside of the carton.
3. Cut the tape at the top of the carton. If you use a long cutting instrument, exercise care to
avoid damaging the content inside.
4. Open up the top flaps of the carton to reveal the content inside. Remove the protective foam
on top of the system. Carefully remove each item from inside the carton.
1.3 What's in the Box
Carefully check your carton contents against the included packing list, or the inside flap of the
box, and your original purchase order. You should have the items as described in the sections
below.
Contact your Accusys System Integrator/Value Added Reseller or Accusys Customer Service
(see Appendix C "Customer Service and Technical Support" for more information) to report any
missing item.
1.3.1
A08S3-PS System
Your ExaSAN RAID disk system carton contains the following items:
1. PCIe 3.0 RAID disk system - A08S3-PS (x1)
2. Accessories package (x1)
1.3.2 A08S3-PS Accessories
The Accessories package includes the following items. These items can also be ordered and
shipped separately from Accusys.
1. QSFP Host Bus Adapter Z2M (x1)
2. 2M QSFP copper cable (x1)
3. AC power cord (x1)
4. Installation DVD (x1)
5. Packing list (x1)
6. Screw pack (x1)
7. Chassis key (x2)
1.3.3 A08S3-PS Disk Tray package
The Disk Tray package is included inside the chassis with a total of 8 disk trays.
User Guide
1. Introduction
Page 1-7
Advertisement
Table of Contents
