Figure 81: Gui "Snapshot Setting 1/2" - Accusys ExaSAN A08S3-PS User Manual

Delete Shot
Delete the selected shot.
1. Select the Delete Shot function from the drop down menu.
2. Select the required shot by clicking on the Shot No. radio button. From the respective drop
down menus, select the source volume and destination volume. Unavailable shots are
grayed out.
3. Check the Confirm box and click OK to delete a snapshot.
Split Shot
Split Now –
Split the selected shot or changes scheduling. The shot is split and read as two separate shots;
therefore, it becomes two separate slices after being split.
1. Select the Split Shot function from the drop down menu.
2. Select the Split Now radio button.
3. Select the required shot by clicking on the Shot No. radio button. From the respective drop
down menus, select the source volume and destination volume. Unavailable shots are
grayed out.
4. Check the Confirm box and click OK to split the snapshot.
Split Scheduling –
Set any time to split shot.
1. Select the Split Shot function from the drop down menu.
2. Select the Split Scheduling radio button.
3. Click on the time and date button to set split time.
4. Select the required shot by clicking on the Shot No. radio button. From the respective drop
down menus, select the source volume and destination volume. Unavailable shots are
grayed out.
5. Check the Confirm box and click OK to split the snapshot.
User Guide

Figure 81: GUI "Snapshot setting 1/2"

4. How to Use
Page 4-38