GLP impression spot one Instruction Manual page 20

30) Iris coarse
31) Iris fine
Locking and unlocking the Control Panel
The Display will auto look automatically if the Touch Panel will not use for 10s. To unlook the Touch
Panel you have to press one of the menu buttons for 2s..
1)
Colors
The predefined colors can be used as start colors for the Rainbow effect. First select a desired start
color, then activate the rainbow effect. All
and execute the rainbow effect synchronously. Different
start colors but will still execute the rainbow effect synchronously. If you choose a color different from
the ones marked with
2)
Rainbow-effect Stop
will pause this function. After resuming the rainbow-effect will be continued with the current color.
3)
The Rainbow-effect
will run synchronously only if it is started from one of the predefined colors (see also
4)
Attention:
Please note that shutter frequencies over 10 Hz are prohibited in some countries. Especially
frequencies in the range of 5 - 12 Hz can possibly cause epileptic seizures
irritation with a latency period of min. 70 ms. Please also refer to the relevant legislation of each
country (For Germany for example: BGI 810-4 (Anhang 2) "Sicherheit bei Produktionen und
Veranstaltungen - Scheinwerfer").
5)
Color Temperature
At anytime the I M P R E
I M P R E
GLP German Light Products GmbH
(Instruction version 1.93) / from software version 1.52
Prism rotation, slow-fast, CW
Prism rotation, fast-slow,
CCW
Prism rotation stop
Iris open – closed
Iris low
I
I
1)
in the tables above the rainbow start-color will be red.
S S I O N S p o t O n e can be used the color correction for every RGB color.
S S I O N S p o t O n e
m p r e s s i o n S p o t O
m p r e s s i o n S p o t O
I m p r e s s
I m p r e s s
20
130..191 82..BF
192..253 C0..FD
254..255 FD..FF
0..127 00..7F
0..255 00..FF
n e
n e
will then begin from that color
i o n S p o t O n e
i o n S p o t O n e
can have different
1)
before).
continuous blink
51..75
76..99
99.100
00..50
00..100